Where To Buy Electrical Contact Cleaner
When it comes to electrical contacts, failures can be costly. Cleaning electrical contacts is one way to prevent unnecessary failure and can even extend the lifespan of your electrical system. Electrical contact cleaners are the best way to address rust, oxidation and debris as part of your regular maintenance plan.
where to buy electrical contact cleaner
Over time, electrical contacts can oxidize or corrode through the presence of moisture and oxygen. Depending on the facility, electrical connections may prematurely degrade due to high pressure, high temperatures or harsh chemicals. Even small amounts of oxidation can coat metal in a thin layer of material. This, in turn, reduces conductivity and can cause contact failure.
Adding regular electrical contact cleaning to your maintenance plan can help prevent corrosion and oxidation before connection failure. Electrical contact cleaners come in several types, from physical tools to sprays and chemicals. According to Mechanic Base, selecting the right contact cleaner depends on the type of metals used and the type of corrosion. Here are some options:
Specialty contact cleaners are sprays or chemicals designed to remove dirt and grime, corrosion and oxidation from electrical contacts. Some cleaners are highly flammable or toxic, and should only be used in well-ventilated areas with the power shut off. Other cleaners are designed for high temperatures or voltages, when power cannot be shut off. Labels on contact cleaners will always designate whether they are safe to use with most plastics or if they are safe to use with all plastics. Using improper cleaners can dissolve and break down plastic parts, however. Brake fluid, for example, should not be used as a contact cleaner, according to Mechanic Base. It can break down plastic parts and cause further damage to electrical parts.
The instructions for each contact cleaner will depend on the specific product, but in general, there are several steps to cleaning a contact. The most important step, if possible, is to shut off power before undertaking any contact maintenance. If shutting off the power is not possible, using a high-dielectric strength rated product (at least over 30 kV) will be best, and a nonflammable option in case of any sparking.
404B Contact Cleaner With Silicone is a very fast-drying electrical contact cleaner. Its plastic-safe solvent leaves a thin film of dry electronics-grade silicone while effectively dissolving oil and organic residues.
This rapid electrical contact cleaner also provides lubrication, preventing wear and tear, as well as a layer of protection from oxidation and the elements. In addition, the dry lubrication means it performs better in dusty environments compared with mineral oil alternatives.
WD-40 Specialist Contact Cleaner, featuring patented Smart Straw technology, blasts away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. It dries quickly, leave no residue and removes over 95% of common surface contaminants, making it the best at cleaning electrical contacts and for optimal performance of equipment. Safe and ideal for use on printed circuit boards, controls, battery terminals, switches, precision instruments and electric panels.
UPPER CUT is a high purity, high dielectric, rapidly evaporating, non-flammable aerosol spray contact and circuit board cleaner. Specially formulated for removing condensation, dust and other particulate matter from sensitive electronic parts.
This contact cleaner is great for use on circuit boards, wire terminals, relays, switches, contacts, circuit breakers, tuners, potentiometers, cable ends and receptacles, control panels, motors and other electrical equipment.
Electrical Contact Cleaner cleans, lubricates, and protects electrical contacts from corrosion, and is safe on most plastics. Cleaning action quickly removes greases, dust, and oxidation, restores and maintains precision and efficiency to the instrument and component. Includes extension tube for pinpointing application. USDA Approved.
Professional strength cleaner specifically designed to remove grease, oil and other contaminants from electrical components. Unique and proprietary formulation displaces moisture and is completely non-corrosive and non-staining. CFC-free and VOC compliant cleaner safely cleans electrical components, dries quickly and leaves behind no moisture, residue or film.
When using isopropyl alcohol as a contact cleaner, you must be sure to use the purest grade possible. Look for at IPA (isopropyl alcohol) 99%. This grade of alcohol will dissolve a range of contaminants including oils from the skin, nicotine deposits, dead skin, and more. 99% Purity IPA cleans well, and dries quickly, which is exactly what you want in an electrical contact cleaner.
Acetone, commonly known as nail polish remover, is an extremely powerful solvent that makes for an excellent electrical contact cleaner. As with pure isopropyl alcohol, it quickly dissolves much of the grime that accumulates on guitars during use, and it dries even faster leaving no residue.
Water is full of mineral deposits and other contaminants that will very quickly cause oxidization, or rust, on the electrical components of your guitar. Not only will this cause more crackles, pops and other unwanted noises, but it can also irreparably damage them, requiring replacement. In addition, much like vinegar, water does not dry quickly, which always leaves the potential for hidden moisture remaining on the contacts.
Next on our list, we have an electronic contact cleaner from a well-known brand called BW-100, designed and manufactured by BEX Inter Corporation. This cleaner is ideal to use in various places and offers the best solution to clean up your electronic components.
You can completely rely on the fast-drying formula here. The cleaner will quickly make things good to go with without wasting much of your time. Even after applying this spray, you can again use your electrical appliances without any worries.
We hope the above information would be helpful to make a firm and satisfying decision. The electrical contact cleaner indeed is one of the important partners for your electronics and automotive cleaning application. And this adds more reasons to get a quality and reliable product.
So now you can go back to the garage and flex your electrical contact cleaner knowledge. If you would like more specialist tools, why not explore our Specialist range of products here so that you too, can be a professional.
Cleans and loosens any oxidationdeposits from all kinds ofelectrical terminals, connectorsor contacts. Removes oxide andsulphide deposits, residue, resin,oil or dirt. Eliminates distortionand the occurrence of unreliableresistance or cracking noises.Safe for use on automotive circuitboards. Specify non-chlorinated.
FD Electrical Contact Cleaner leaves no residue once dried. It is excellent for cleaning contacts, meters, communication radios, and cleaning medium voltage cable during the terminating process. For precision cleaning (residue-free use), prevent recontamination with existing grime by finishing with a fresh wipe, spraying until the solvent runs clear, or rinsing in a fresh bath of FD cleaner. FD Electrical Contact Cleaner is fast evaporating and does not require forced air to dry. In areas where solvent has pooled, the part may be wiped with an absorbent, lint-free towel.
Maintain Sensitive Electronic Equipment Dust, moisture, flux, and other contaminants can all build up in electronic equipment and cause performance to suffer. Build up can lead to overheating and premature failure. CRC QD Electronic Cleaner is perfect for cleaning sensitive components and restoring them to proper performance. It is non-conductive with no chlorinated solvents, giving you peace of mind in your working environment. Well-maintained equipment helps prevent issues like contact failure and unnecessary downtime of electronics. Great for Automotive ApplicationsCars are being produced with more and more electronic components every day. QD Electronic Cleaner is perfect for cleaning the sensitive electronic components in your vehicle. Use it on your connectors, terminals, pins, fuse blocks, modules, wires, and sensors (not including mass air flow sensors) to keep the electronics in your automobile clean and functioning as intended. Compatible with the Most PlasticsCRC QD Electronic Cleaner is safe for delicate plastics and delicate components. This hydrocarbon and alcohol-based, precision cleaner can remove a variety of contaminants from sensitive electronics and their plastic parts. Where CFC cleaners can disintegrate plastics, this contact spray cleans efficiently and safely, maintaining your electronics and preventing failures. A Complete Cleaning - with No Residue Left BehindCRC QD leaves no residue behind on surfaces, which means no wiping down after spraying. A contactless clean is important when it comes to the most sensitive electronic components. This electronic contact spray dries quickly without build up. CRC QD is also an ideal electronic connector cleaner and works great on other electronics to clean without leaving a mess behind! Easy, Safe, and EffectiveCRC QD Electronic Cleaner is the ideal solution to thoroughly clean electronics and equipment. Simply spray directly onto the dirty surface area and let it dry. CRC QD works quickly without harming equipment. Great for cleaning small sockets or ports that may be impossible to reach with a brush or duster. CRC provides this quick-cleaning, contact-free choice for mechanics and maintenance professionals, delivering effective cleaning with the ease of a simple spray and go solution. CRC QD Electronic Cleaner is the safe and reliable cleaner that will protect your investment and get the job done! When your electronics need cleaning, turn to another trusted, proven solution from CRC. 041b061a72